• High Pressure Pump Plungers

High-Pressure Pump Carbide Plunger

The Tolerance of Tungsten Carbide Plunger.

Tolerance is the most important for tungsten carbide plunger, because the plunger is used in a high-pressure water pump, and the water pump needs high air pressure. In order to prevent the water pump from air leaking, it is required that the tungsten carbide plunger and the hole need to have good air tightness. tungsten carbide plunger from TUNGSTEN MAN, length tolerance: 0,+0.05mm outer diameter +0,+0.01mm tolerance: surface finish:Surface Finish:Ra 0.2 -Ra 0.4.

How to order tungsten carbide plunger from TUNGSTEN MAN.

If you are still interested in our tungsten carbide plunger when you are reading here, you may be wondering how can i order from TUNGSTEN MAN. That is very simple. first of all, send an email to [email protected] to get connect with our team. we will design a drawing of a tungsten carbide plunger for your application, and a suitable tungsten carbide grade and tolerance plunger will be suggested to you. We will send an invoice to you after all drawings and technical specifications are confirmed. The order of tungsten carbide plunger lead time will be around 15-18days after payment is confirmed.

TUNGSTEN MAN is a manufacturer of Tungsten carbide plungers located in Zhuzhou, Hunan, China. The main features of TUNGSTEN MAN's Tungsten carbide plunger are stable mechanical properties, high wear resistance and high impact resistance.

In order for our customers to know more about the tungsten carbide plunger produced by TUNGSTEN MAN, we will introduce our understanding of the Tungsten carbide plunger from the following :

The tungsten carbide grade of the tungsten carbide plunger.

there are three grades for tungsten carbide plungers YG8 or YG15 Or YN.

Most tungsten carbide plungers are needs very good at wear resistance when the plungers work on the pump. depends on TUNGSTEN MAN suggesting tungsten carbide YG8X which 8% of cobalt as a binder and 92% of tungsten will normally suit the application, 5000 psi to 40000psi. another YG15X of tungsten carbide grade is for higher pressure up to 100000. Map.YN grade is for special applications when no magnet is requested. all YN tungsten carbides are no-magnet. this grade is perfect for a no-magnet tungsten carbide plunger 



For more information on tungsten carbide plunger please send an email to: [email protected]

Write a review

Note: HTML is not translated!
    Bad           Good

Tungsten Carbide Plungers For High-Pressure Pump

  • Brand: Tungsten Man
  • Product Code: TGP003
  • Availability: In Stock
  • $8.88

  • Ex Tax: $8.88

This product has a minimum quantity of 10

Related Products

High Pressure Pump Plungers

Tungsten Carbide Plunger For High-Pressure Pump

Tungsten Carbide Plunger For High-Pressure Pump What is a Tungsten Carbide plunger?A tungsten c..

$8.88 Ex Tax: $8.88

High Pressure Pump Plungers

Dia 4.50″ , 5.00″ ,5.50″ ,5.75″ Tungsten Carbide Plunger

Dia 4.50″, 5.00″,5.50″,5.75″ Tungsten Carbide Plunger TUNGSTEN MAN is a manufacturer of Tungste..

$8.88 Ex Tax: $8.88

High Pressure Pump Plungers

High Pressure Pump Carbide Plunger

High-Pressure Pump Carbide PlungerThe Tolerance of Tungsten Carbide Plunger.Tolerance is the most im..

$8.88 Ex Tax: $8.88

Tags: pump plungers and barrels, frac pump plungers, bosch a pump plungers, injection pump plungers, water pump plungers, water jet pump plunger, pressure washer pump ceramic plungers, injection pump stuck plunger, pumping plungers