• Buy Tungsten Carbide Rods

Buy Tungsten Carbide Rods

 The TOP 1 thing you should know before you buy tungsten carbide rods is the Co content and the average grain size of WC. 


As we all know, tungsten carbide rods and alloys are made of hard compounds of refractory metals such as tungsten carbide (WC) powder and bonding metals such as cobalt (Co) powder through powder metallurgy process/injection moulding technology / 3D printing process The material has the characteristics of high hardness, good toughness, wear resistance, heat resistance, and corrosion resistance. It is widely used in cutting tools, hardware moulds, aerospace parts and other fields. However, the physical and chemical properties of tungsten carbide rods are not static and are mainly affected by WC powder content, WC grain and Co content.

Generally, as the WC powder content increases, the hardness of the tungsten carbide rods increases, and the wear resistance becomes better, but the toughness becomes worse; as the WC grain decreases, the hardness of the alloy increases, and vice versa; The higher the cobalt content, the better the toughness of the alloy and the lower the hardness, and vice versa the worse the toughness and the higher the hardness.


Studies have shown that when the Co content is 6% and the average grain size of WC is 0.8μm, the density of tungsten carbide rods is 14.85-14.95g/cm3, the bending strength is greater than or equal to 3000MPa, and the hardness is 92.6HRA (±0.5), which is suitable for It is used in the manufacture and processing of non-metallic and non-ferrous metal tools.


When the Co content is 6% and the average grain size of WC is 0.4μm, the density of tungsten carbide rods is 14.5-14.7g/cm3, the bending strength is greater than or equal to 3500MPa, and the hardness is 94HRA (±0.5), suitable for powder metallurgy Processing and can be made into PCB (printed circuit board).


When the Co content is 8% and the average WC grain is 0.5μm, the density of the tungsten carbide rods is 14.4-14.6g/cm3, the bending strength is greater than or equal to 3600MPa, and the hardness is 93.3HRA (±0.5), suitable for hard ends Milling and fine milling, processing fibre, wood, plastic, brass, aluminium alloy, etc., can make PCB micro drills and carving knives.


When the Co content is 10% and the average grain size of WC is 0.8μm, the density of tungsten carbide rods is 14.35-14.5g/cm3, the bending strength is greater than or equal to 4000MPa, and the hardness is 91.7HRA (±0.5), which is suitable for processing cast iron. The first choice for aluminium alloy and various non-metallic materials; it is suitable for processing materials with a hardness lower than HRC55, and has good versatility.


When the Co content is 10% and the average WC grain size is 1.0μm, the density of tungsten carbide rods is 14.4-14.55g/cm3, the bending strength is greater than or equal to 3800MPa, and the hardness is 91.2HRA (±0.5), which can be used for ordinary end milling, Rough milling, suitable for HRC30-45 material processing.


When the Co content is 12% and the average grain size of WC is 0.4μm, the density of tungsten carbide rods is 13.95-14.25g/cm3, the bending strength is greater than or equal to 4000MPa, and the hardness is 92.5HRA (±0.5), suitable for processing grey cast iron, Titanium alloys, heat-resistant materials, stainless steel, hardened steel, glass fibre reinforced plastics and composite materials, suitable for high-speed processing.


When the Co content is 9% and the average grain size of WC is 0.2μm, the density of tungsten carbide rods is 14.2-14.4g/cm3, the bending strength is greater than or equal to 4000MPa, and the hardness is 93.7HRA (±0.5), which is suitable for processing high Strength, high wear resistance material.


When the Co content is 7% and the average grain size of WC is 0.5μm, the density of the tungsten carbide rods is 14.4-14.7g/cm3, the bending strength is greater than or equal to 3600MPa, and the hardness is 93.3HRA (±0.5), which is suitable for machine tools with relatively high rigidity. Good finishing can be made into a reamer, deep hole drill and PCB (printed circuit board)


When the Co content is 5% and the average grain size of WC is 0.4μm, the density of the tungsten carbide rods is 14.5-14.8g/cm3, the bending strength is greater than or equal to 3500MPa, and the hardness is 94HRA (±0.5), which has excellent wear resistance Sex, can be made into PCB.


When the Co content is 10% and the average grain size of WC is 0.5μm, the density of the tungsten carbide rods is 14.15-14.3g/cm3, the bending strength is greater than or equal to 4000MPa, and the hardness is 93.0HRA (±0.5), and the machinable hardness is in Materials between 45-65HRC can be used for milling high-temperature resistant steel, hardened steel, grey cast iron, heat-resistant alloy, titanium alloy, etc., suitable for high-speed processing.


When the Co content is 10% and the average grain size of WC is 0.6μm, the density of tungsten carbide rods is 14.4-14.55g/cm3, the bending strength is greater than or equal to 3800MPa, and the hardness is 92.1HRA (±0.5), suitable for machine tool rigidity It is better for processing stainless steel, aluminium alloy, grey cast iron, titanium alloy and glass fibre reinforced plastic.

Samples order :

Solid Tungsten Carbide Rods are just one material, that needs to be processed and reused, so the problem can occur in this process or our rods.

Therefore, we strongly recommend that you purchase some samples for testing. This way you can very clear understanding of our material that is suitable for you. But also, you have previously purchased product comparison.

what are your questions about our Solid tungsten carbide rods?

For further information (MOQ, price, delivery, etc.), please request a quote or send an email to:[email protected]. Our sales team and engineers are ready to offer their expertise



Buy Tungsten Carbide Rods

  • Product Code: STCR06
  • Availability: In Stock

* Required fields


Available Options


This product has a minimum quantity of 10

Related Products

Buy Tungsten Carbide Rods

Buy Tungsten Carbide Rods

Buy Tungsten Carbide Rods The TOP 1 thing you should know before you buy tungsten carbide rods ..

ØD3.00mm Tungsten Carbide End Mill Blanks 12% Cobalt

ØD3.00mm Tungsten Carbide End Mill Blanks 12% Cobalt

ØD3.00mm Tungsten Carbide End Mill Blanks 12% Cobalt Tungsten Carbide End Mill Blanks Grade :Tu..

Carbide Blanks Suppliers

Carbide Blanks Suppliers--TUNGSTEN MAN

Leading Carbide Blanks Manufacturers for Businesses Worldwide--TUNGSTEN MANFind top-grade carbide bl..

ØD8.00mm Tungsten Carbide End Mill Blanks 12% Cobalt

ØD8.00mm Tungsten Carbide End Mill Blanks 12% Cobalt

ØD8.00mm Tungsten Carbide End Mill Blanks 12% Cobalt Tungsten Carbide End Mill Blanks Size..

Tungsten Carbide Rods Suppliers

Tungsten Carbide Rods Suppliers

Tungsten Carbide Rods SuppliersAvailable size :Solid Tungsten Carbide Rods, diameter from 3mm to 30m..

Tungsten Carbide Rods For Sale - TUNGSTEN MAN

Tungsten Carbide Rods For Sale - TUNGSTEN MAN

Tungsten Carbide Rods For Sale - TUNGSTEN MANTUNGSTEN MAN is a manufacturer of Tungsten carbide rods..

Solid Carbide Rods - TUNGSTEN MAN

Solid Carbide Rods - TUNGSTEN MAN

Solid Carbide Rods - TUNGSTEN MANAvailable size :Solid Tungsten Carbide Rods, diameter from 3mm to 3..

Carbide Rods Suppliers

Carbide Rods Suppliers

Carbide Rods SuppliersWhere to Buy Quality Carbide Rods?Get affordable and reliable Carbide Rods fro..

Carbide Rods

Carbide Rods

Tungsten Carbide Rods SuppliersNeed quality carbide rods for your industry? Check out the guide from..

carbide rod manufacturers

Carbide Rod Manufacturers

Carbide Rod ManufacturersWhere to Find the Top Carbide Rod Manufacturers in 2024Ready to find the be..

end mill

Tungsten Carbide Blanks--End Mill Blanks

Tungsten Carbide Blanks--End Mill BlanksHow to Select Quality End Mills Blanks for Maximum Performan..

Carbide Blanks Suppliers

Best Carbide Blanks Suppliers in China

The Best Carbide Blanks Suppliers in ChinaLooking for the best carbide blanks suppliers in China? We..

Carbide Rod Blanks

Best Tungsten Carbide Rod Blanks Manufacturer In China-TUNGSTEN MAN

Best Tungsten Carbide Rod Blanks Manufacturer In China-TUNGSTEN MANUnderstanding the Different Types..

carbide rods china

Carbide Rod Supplier In China

TUNGSTEN MAN: Leading Suppliers of Carbide Rods from China Looking for reliable and high-qualit..

unground carbide rods

Carbide Rods As Sintered Length 330 (310) mm

Carbide Rods As Sintered Length 330 (310) mm Grade Of Tungsten Carbide Rods ..

Carbide Rods Ground

Carbide Rods Ground To h6 Length 330 mm Chamfered 45°

Carbide Rods Ground To h6 Length 330 mm Chamfered 45° Grade Of Tungsten Carbide RodSizes Of Tungsten..

Precision Ground Rods

Carbide Rods Ground To h6 Length 100 mm Chamfered 45°

Carbide Rods Ground To h6 Length 100 mm Chamfered 45°Grade Of Tungsten Carbide RodGrade   ..

polished Carbide Rods

Carbide Rods ,Cut To Length--Inches Sizes Chamfered

Carbide Rods, Cut To Length--Inches Sizes Chamfered Grade Of Tungsten Carbide RodGrade WC+other..

Cut To Length

Carbide Rods ,Cut To Length Ground To h6 Chamfered 45°

Carbide Rods, Cut To Length Ground To h6 Chamfered 45° Grade Of Tungsten Carbide RodGrade WC+ot..

 Carbide Rods With Coolant Hole

Unground Carbide Rods With One Straight Coolant Hole

Unground Carbide Rods With One Straight Coolant Hole Grade Of Tungsten Carbide RodGrade WC+othe..

tungsten metal rod

Unground Carbide Rods With Two Straight Coolant Holes

Unground Carbide Rods With Two Straight Coolant Holes Grade Of Tungsten Carbide RodGrade WC+oth..

Gun Drill Blank

Gun Drill Blank

Gun Drill Blank  Grade Of Tungsten Carbide RodGrade WC+others CoGrain Size (μm)Hardne..

Ball Nose Rod h6 Ground

Ball Nose Rod h6 Ground

Ball Nose Rod h6 Ground Grade Of Tungsten Carbide RodGrade WC+others CoGrain Size (μm)Hard..

Tungsten Carbide Flat Bars

Tungsten Carbide Flat Bars

Tungsten Carbide Flat Bars Grade Of Tungsten Carbide RodGrade WC+others CoGrain Size (μm)H..

carbide blanks

How to Choose the Right Carbide Blanks for Your Application

How to Choose the Right Carbide Blanks for Your ApplicationCarbide blanks are an essential component..

Carbide Rod Blanks

Carbide Rod Blanks

How to Choose the Right Carbide Rod Blanks for Your ProjectCarbide rod blanks are an essential compo..

carbide rod manufacturers

Tungsten Carbide Manufacturer

Tungsten Carbide Manufacturer5 Factors to Consider When Choosing a Tungsten Carbide ManufacturerLook..

Tungsten Carbide Supplier

Tungsten Carbide Supplier

Tungsten Carbide SupplierTungsten Carbide Supplier Comparison: Which Company Offers the Best Value?L..

tungsten carbide

Tungsten Carbide Tools: The Pros and Cons

Tungsten Carbide Tools: The Pros and ConsTungsten carbide tools are known for their durability and s..

carbide rods manufacturer

Why TUNGSTEN MAN is The Leading Carbide Rods Manufacturer in China

Why TUNGSTEN MAN is The Leading Carbide Rods Manufacturer in China Looking for a reliable carbi..

 Solid Carbide Rods

How to Choose the Right Solid Carbide Rods for Your Cutting Tools

How to Choose the Right Solid Carbide Rods for Your Cutting Tools Choosing the right solid carb..

Tungsten Titanium Carbide

The Science Behind Tungsten Titanium Carbide: How It Works and Why It's So Strong

The Science Behind Tungsten Titanium Carbide: How It Works and Why It's So StrongTungsten titanium c..

Tungsten Carbide Strips

How to Buy Tungsten Carbide Strips: Size 1/8" x 1-1/4" x 6", K20, K30, K40, ground or unground.

How to Buy Tungsten Carbide Strips: Size 1/8" x 1-1/4" x 6", K20, K30, K40, ground or unground.Looki..

Carbide Strips

How Carbide Strips Improve Cutting Efficiency in Metalworking

How Carbide Strips Improve Cutting Efficiency in MetalworkingDiscover how carbide strips can revolut..

carbide boring bars

Choosing the Right Carbide Boring Bar for Your Machining Needs

Choosing the Right Carbide Boring Bar for Your Machining NeedsFind the perfect carbide boring bar fo..

Ground Tungsten Carbide Rods

Ground Tungsten Carbide Rods

Ground Tungsten Carbide RodsThe Science Behind Ground Tungsten Carbide Rods: How They Enhance Perfor..

Carbide Strip

TUNGSTEN MAN--Top manufacturer of Carbide Strips in Industrial Applications

TUNGSTEN MAN--Top manufacturer of Carbide Strips in Industrial ApplicationsTUNGSTEN MAN is the leadi..

Carbide Rod Blanks

How Carbide Rod Blanks Made ? Carbide Rod Banks Manufactured by TUNGSTEN MAN

How Carbide Rod Blanks Made? Carbide Rod Banks Manufactured by TUNGSTEN MANWelcome to Tungsten Man, ..

Carbide Wear Strips

Carbide Wear Strips

Carbide Wear StripsCarbide wear strips are becoming increasingly popular in industries that demand r..

carbide rod manufacturers

Factors To Consider When Choosing A Carbide Rod Manufacturer

Factors To Consider When Choosing A Carbide Rod ManufacturerCarbide rods find wide-ranging applicati..

 carbide rod price

Carbide Rods Manufacture of High-Performance Carbide Rods And Affordable Price--TUNGSTEN MAN

Discover the Carbide Rods Manufacture of High-Performance Carbide Rods And Affordable Price--TUNGSTE..

Carbide Rods For PCB Tools

Carbide Rods For PCB Tools

Carbide Rods For PCB Tools  Grade Of Carbide Rods For PCB ToolsGrade WC+others CoGra..

c2 tungsten carbide rods

C2 Tungsten Carbide Rods: Hardness: 92.1 Ra Strength: 325,000 psi Cobalt Content: 6%

C2 Tungsten Carbide Rods: Hardness: 92.1 Ra Strength: 325,000 psi Cobalt Content: 6%What is C2-grade..

Gun Drill Blank

Gun Drill Blank With Kidney Holes

Gun Drill Blank With Kidney Holes Grade Of Gun Drill Blank With Kidney HolesGrade WC+others&nbs..

Carbide Rod Prices

Carbide Rod Prices in 2024: A Comprehensive Overview for Buyers

Carbide Rod Prices in 2024: A Comprehensive Overview for BuyersIn 2024, the carbide rod market is ex..

carbide rod manufacturers

Carbide Rods With Coolant Hole

Carbide Rods With Coolant HoleMaximizing Efficiency in Deep Hole Drilling: Why TUNGSTENMAN's Carbide..

Tags: tungsten carbide rods, STCR03, Tungsten Carbide Tools, tungsten carbide rods for sale, tungsten carbide rods suppliers, tungsten carbide rods price, tungsten carbide rods hs, tungsten carbide rods types, , tungsten carbide rods hs code no, tungsten carbide rods hs code zauba, tungsten carbide rods uses, tungsten carbide rods tariff code, solid tungsten carbide rods, hs code of tungsten carbide rods, use of tungsten carbide rods, hsn code of tungsten carbide rods, specifications of tungsten carbide rods, where to buy tungsten carbide rods, applications of tungsten carbide rods, hts code for tungsten carbide rods, cth for tungsten carbide rods, tariff number for tungsten carbide rods